User Tools
milestones
This is an old revision of the document!
Milestones
Students who successfully implement all of the milestones –on time– should have a nicely working system at the end of the semester. Note that some milestones must be performed by individuals, as in every student must implement the milestone on their own. Some milestones are group-based. See the table below.
| Milestone | Individual/Group |
| Milestone 1: Verify Analog Electronics from ECEn 340 and Implement Queues on ECEn 330 Board | Individual |
| Milestone 2: Complete MatLab Modeling of the Laser-Tag System | Individual |
| Milestone 3: Implement All ZYBO Software and Demonstrate a Feedback Configuration With the ECEn 330 Board (only) | Individual |
| Milestone 4: Integrate Analog Electronics with ECEn 330 board and Demonstrate Working System at 1 Foot | Group |
| Milestone 5: Demonstrate the Fully-Packaged Laser-Tag System Working at 40 Feet (at least) | Group |
milestones.1424986808.txt.gz · Last modified: 2015/02/26 14:40 by hutch
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 3.0 Unported
