ECEN 390 - Laser Tag Project

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
==== Source Code ====

I have provided the source code for your ".h" file and part of the code for your ".c" file. You must implement all of the functions that are contained in the ".h" file.

==== Test Code: queue_runTest() ====

The provided queue_runTest code is pretty thorough. You will want to write your own simple functions to test basic functionality. The test code does a pretty good job of telling you when a failure occurs but it will likely be difficult to debug your code using queue_runTest(). A successful run of queue_runTest() would look like this (just showing the last iteration of the loop):
<code>
=== Queue Test Iteration 9 ===
=== Commencing basic fill test (calling queue_push() until full) of queue of size: 67. === 
=== Queue: test_queue passed a basic fill test.
=== Commencing basic empty test (calling queue_pop() until empty) === 
=== Queue: test_queue passed a basic empty test.
=== Commencing push/pop test.) === 
=== Queue: test_queue passed a push/pop test.
=== Commencing error-condition test (calling queue_pop() until empty) === 
=== + User code should print a queue empty error message-> queue_pop(): errorQ is empty. queue_pop() failed.
=== + User code should print a queue full error message-> errorQ is full. queue_push failed.
=== Queue: test_queue passed error-condition test.
=== Commencing overwritePush test (calling queue_pop() until empty) === 
=== Queue: test_queue passed overwritePush test.
=== All queue tests passed. ===
</code>

A couple of considerations.

  * queue_runTest() is extensively commented so the best thing to do when you see an error message is to look at the source code to get an idea of how the code is exercising your queue code. 
  *  queue_runTest() loops several times. If queue_runTest() hangs and does not complete all of the tests (there are 10 iterations of the main test loop), it is likely that you are corrupting memory somehow, i.e., you are accessing memory outside of an array boundary.

----

==== queue.h ====

<file c queue.h>
/*
 * queue.h
 *
 *  Created on: Mar 25, 2014
 *      Author: hutch
 */

#ifndef QUEUE_H_
#define QUEUE_H_

#include <stdint.h>
#include <stdbool.h>

#define QUEUE_MAX_NAME_SIZE 50  // Limit the size of the statically-allocated queue name.

// Return this when queue_pop(), queue_readElementAt() needs to return something during an error condition.
#define QUEUE_RETURN_ERROR_VALUE 0.0

// Big enough to address everything in the queue.
typedef uint32_t queue_index_t;

// Just make everything double for this project.
typedef double queue_data_t;

// Not sure we need something different from the index type.
typedef uint32_t queue_size_t;

// The queue struct with elementCount to speed up computations to determine element count.
// Queue will use the empty location and pointer arithmetic to determine full and empty.
typedef struct {
  queue_index_t indexIn;			// Always points to the next open slot.
  queue_index_t indexOut;			// Always points to the next element to be removed from the queue (or "oldest" element).
  queue_size_t size;		// This is the size of the data array. Actual queue capacity is one less.
  queue_size_t elementCount;	// Number of things currently in the queue.
  queue_data_t * data;				// Points to a dynamically-allocated array.
  bool underflowFlag;         // True if queue_pop() is called on an empty queue. Reset to false after queue_push() is called.
  bool overflowFlag;          // True if queue_push() is called on a full queue. Reset to false once queue_pop() is called.
  char name[QUEUE_MAX_NAME_SIZE];	// Name for debugging purposes.
} queue_t;

// Allocates the memory to you queue (the data* pointer) and initializes all parts of the data structure.
// Prints out an error message if malloc() fails and calls assert(false) to
// print-out line-number information and die.
void queue_init(queue_t* q, queue_size_t size, const char* name);

// Get the user-assigned name for the queue.
const char* queue_name(queue_t*);

// Returns the capacity of the queue.
queue_size_t queue_size(queue_t* q);

// Returns true if the queue is full.
bool queue_full(queue_t* q);

// Returns true if the queue is empty.
bool queue_empty(queue_t* q);

// If the queue is not full, pushes a new element into the queue and clears the underflowFlag.
// IF the queue is full, set the overflowFlag, print an error message and DO NOT change the queue.
void queue_push(queue_t* q, queue_data_t value);

// If the queue is not empty, remove and return the oldest element in the queue.
// If the queue is empty, set the underflowFlag, print an error message, and DO NOT change the queue.
queue_data_t queue_pop(queue_t* q);

// If the queue is full, call queue_pop() and then call queue_push().
// If the queue is not full, just call queue_push().
void queue_overwritePush(queue_t* q, queue_data_t value);

// Provides random-access read capability to the queue.
// Low-valued indexes access older queue elements while higher-value indexes access newer elements
// (according to the order that they were added).
// Print a meaningful error message if an error condition is detected.
queue_data_t queue_readElementAt(queue_t* q, queue_index_t index);

// Returns a count of the elements currently contained in the queue.
queue_size_t queue_elementCount(queue_t* q);

// Returns true if an underflow has occurred (queue_pop() called on an empty queue).
bool queue_underflow(queue_t* q);

// Returns true if an overflow has occurred (queue_push() called on a full queue).
bool queue_overflow(queue_t* q);

// Frees the storage that you malloc'd before.
void queue_garbageCollect(queue_t* q);

// Prints the current contents of the queue. Handy for debugging.
// This must print out the contents of the queue in the order of oldest element first to newest element last.
// HINT: Just use queue_readElementAt() in a for-loop. Trivial to implement this way.
void queue_print(queue_t* q);

// Performs a comprehensive test of all queue functions. Returns false if the test fails, true otherwise.
// Prints out a series of informational messages during the test.
bool queue_runTest();

#endif /* QUEUE_H_ */
</file>

-------------
==== queue.c ====

<file C queue.c>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "queue.h"
#include <assert.h>

// Uncomment line below to print out informational messages during queue operation.
// #define QUEUE_PRINT_INFO_MESSAGES

// Standard queue implementation that leaves one spot empty so easier to check for full/empty.
void queue_init(queue_t* q, queue_size_t size, const char* name) {
  q->underflowFlag = false;  // True if queue_pop() is called on an empty queue.
  q-> overflowFlag = false;  // True if queue_push() is called on a full queue.
  q->indexIn = 0;
  q->indexOut = 0;
  q->elementCount = 0;       // Not required but may ease implementation.
  q->size = size+1;	// Add one additional location for the empty location; size is data-array size, exactly.
  q->data = (queue_data_t *) malloc(q->size * sizeof(queue_data_t));
  if (q->data == 0) {
  	printf("Error!!!: queue_init() failed to allocate the required memory in queue_init()!!! (%ld).\n\r", size);
  	printf("Check your heap and stack size and set them both to 2,000,000 bytes (2,000 kB).\n\r");
  	printf("View Video V11 on the ECEn 330 YouTube channel to see how to set heap and stack size.\n\r");
  	printf("Copy this link to your browser: https://www.youtube.com/watch?v=onO-XojGFMM&feature=youtu.be\n\r");
  	assert(false);
  }
  strncpy(q->name, name, QUEUE_MAX_NAME_SIZE);
#ifdef QUEUE_PRINT_INFO_MESSAGES
  printf("initialized %s.\n\r", q->name);
#endif
}

// Tell the user size in terms of usable locations.
queue_size_t queue_size(queue_t* q) {return q->size-1;}

// Return the name of the queue.
const char* queue_name(queue_t* q) {return q->name;}

// Just free the data array in the queue.
void queue_garbageCollect(queue_t* q) {
  free(q->data);
}

/********************************************************
************* Test Code starts here. ********************
****** invoke queue_runTest() to run test code. *********
********************************************************/

// Used to check the status of the queue flags.
// Returns true if the all of the queue status matches values of the arguments.
// Returns false otherwise.
// Prints informational messages if the queue status does not match the provided argument values.
static bool queue_printQueueStatus(queue_t* q, bool overflowArg, bool underflowArg, bool fullArg, bool emptyArg) {
  bool result = true;
  bool flag;
  if ((flag=queue_overflow(q)) != overflowArg) {  // Check the queue status against the flag.
    result = flag ? result: false;                // Note failure.
    if (flag)                                     // Print helpful informational messages.
      printf("* queue_overFlow(%s) returned true. Should have returned false.\n\r", q->name);
    else
      printf("* queue_overFlow(%s) returned false. Should have returned true.\n\r", q->name);
  }
  if ((flag=queue_underflow(q)) != underflowArg) {  // Check the queue status against the flag.
    result = flag ? result: false;                  // Note failure.
    if (flag)                                       // Print helpful informational messages.
      printf("* queue_underFlow(%s) returned true. Should have returned false.\n\r", q->name);
    else
      printf("* queue_underFlow(%s) returned false. Should have returned true.\n\r", q->name);
  }
  if ((flag=queue_full(q)) != fullArg) {  // Check the queue status against the flag.
    result = flag ? result: false;        // Note failure.
    if (flag) {                           // Print helpful informational messages.
      printf("* queue_full(%s) returned true. Should have returned false.\n\r", q->name);
      printf("* queue: %s contains %ld elements.\n\r", queue_name(q), queue_elementCount(q));
    }
    else {
      printf("* queue_full(%s) returned false. Should have returned true.\n\r", q->name);
      printf("* queue: %s contains %ld elements.\n\r", queue_name(q), queue_elementCount(q));
    }
  }
  if ((flag=queue_empty(q)) != emptyArg) {  // Check the queue status against the flag.
    result = flag ? result: false;          // Note failure.
    if (flag) {                              // Print helpful informational messages.
      printf("* queue_empty(%s) returned true. Should have returned false.\n\r", q->name);
    }
    else {
      printf("* queue_empty(%s) returned false. Should have returned true.\n\r", q->name);
      printf("* queue: %s contains %ld elements.\n\r", queue_name(q), queue_elementCount(q));
    }
  }
  return result;
}

// Assumes testQ is filled with the contents from dataArray.
// Repeatedly calls queue_pop until all of the queue contents have been removed.
// Uses queue_pop() and queue_readElementAt().
// Reads the entire contents of the queue after each pop.
static bool queue_emptyTest(queue_t* testQ, double* dataArray, queue_size_t arraySize) {
  bool tempResult = true;
  bool testResult = true;
  for (int32_t testDataIndex=arraySize-1; testDataIndex>=0; testDataIndex--) {
    // First, pop an element of the queue and check to see if the pop'd value is correct.
    double poppedValue = queue_pop(testQ);
    tempResult = true;
    if (poppedValue != dataArray[arraySize-(testDataIndex+1)]) {
      printf("* Error: queue_pop() returned %lf, should have returned %lf.\n\r", poppedValue, dataArray[arraySize-(testDataIndex+1)]);
      printf("* queue_pop invoked %ld times, testDataIndex: %ld\n\r", arraySize-(testDataIndex+1), testDataIndex);
      tempResult = false;
      printf("* queue_pop() failed. Recommend that you fix this problem before proceeding further.\n\r");
      return false;
    }
    testResult = tempResult ? testResult : false; // Just a logical AND of testResult and tempResult.
    // Next, read all of the remaining elements in the queue to see if they are correct.
    // Because you are using queue_pop(), you must offset the indicies for the array,
    // moving forward after each pop. The indices used with queue_readElementAt() are not offset.
    tempResult = true;
    for (int32_t queueIndex=0; queueIndex<testDataIndex; queueIndex++) {
      double temp;
      if ((temp=queue_readElementAt(testQ, queueIndex)) != dataArray[arraySize-(testDataIndex)+queueIndex]) {
        printf("* Error: queue_readElementAt(%ld) read %lf, queue should contain %lf.\n\r", queueIndex, temp, dataArray[arraySize-(testDataIndex)+queueIndex]);
        printf("* Either queue_pop() or queue_readElementAt() contains a bug.\n\r");
        printf("* Repair this bug before proceeding further.\n\r");
        tempResult = false;
      }
    }
    testResult = tempResult ? testResult : false; // Just a logical AND of testResult and tempResult.
    // Pop a value and check to see if correct.
  }
  tempResult=queue_printQueueStatus(testQ, false, false, false, true);
  testResult = tempResult ? testResult : false; // Just a logical AND of testResult and tempResult.
  return testResult;
}

// Assumes an initialized queue. Fills the queue with the contents of dataArray using queue_push().
// Each time data is pushed, queue_readElementAt() is invoked to ensure the queue contains the
// correct data. This test will pass if queue_push() and queue_readElementAt() work correctly.
static bool queue_fillTest(queue_t* testQ, double* dataArray, queue_size_t arraySize) {
  bool testResult = true;  // Keep track of the results of the test.
  uint32_t testDataIndex = 0;  // Just an index.
  for (testDataIndex=0; testDataIndex<arraySize; testDataIndex++) { // Iterate across the dataArray.
    queue_push(testQ, dataArray[testDataIndex]);  // Push a value onto the queue.
    double temp;  // Keep track of the value ready by queue_readElementAt().
    // Read all elements currently in queue and check to see that they match against the data contained in dataArray.
    if ((temp=queue_readElementAt(testQ, testDataIndex) != dataArray[testDataIndex])) {
      printf("* Error: queue_readElementAt() failed. push value %lf does not match read value %lf.\n\r",
          temp, dataArray[testDataIndex]);
      printf("* Bug is likely in queue_push() or queue_readElementAt().\n\r");
      testResult = false;  // Failed the test.
      break;               // Stop iterating at this point.
    }
  }
  // Queue should be full at this point with no overflow or underflow, argument order:(overflow, underflow, full, empty).
  bool tempResult = true;  // Keep track of the queue_printQueueStatus() test.
  if (testResult) {
    tempResult=queue_printQueueStatus(testQ, false, false, true, false);  // See comment above for argument order.
  }
  testResult = tempResult ? testResult : false;  // Logical AND of testResult and tempResult.
  return testResult;
}

// Builds a test queue and applies a series of pushes and pops.
// The value returned by queue_pop() is checked for correctness.
// queue_elementCount() is also checked frequently to ensure that
// it returns the correct value.
// To perform the test, a non-circular queue is implemented as
// a simple array with a ncqPushIndexPtr and a ncqPopIndexPtr. The
// queue code under test should exhibit the same behavior as the non-circular queue.
// The non-circular queue is initialized to contain random values.
// Values from the non-circular queue are from the ncqPushIndexPtr
// and values to be popped from the queue under test are compared
// to the ncqPopIndexPtr location. The test terminates upon detecting an
// error or if no error has been detected and the entire contents of the
// non-circular queue have been pushed into the test Q and then pop'd
// from the test queue.
#define PUSH_POP_Q_SIZE 100        // The size of the queue.
#define NON_CIRC_Q_SIZE 1000       // Size of noncircularQ used to test the testQ.
#define MAX_PUSH_POP_COUNT 20      // Maximum number of pushes or pops in one pass.
#define PUSH_POP_Q_NAME "pushPopQ" // Name the queue.
static bool queue_pushPopTest() {
  bool testResult = true;
  bool tempResult = true;
  // ncq: non-circular queue
  double* ncq = (double *) malloc(NON_CIRC_Q_SIZE * sizeof(double));
  for (uint16_t i=0; i<NON_CIRC_Q_SIZE; i++) {  // Fill up the non-circular queue with data.
    ncq[i] = (double) rand();
  }
  // Emulate a simple non-circular queue for testing purposes.
  uint16_t ncqPopIndexPtr = 0;  // The pop-pointer for the non-circular queue.
  uint16_t ncqPushIndexPtr = 0; // The push-pointer for the non-circular queue.
  queue_t testQ;             // This is the test Q.
  queue_init(&testQ, PUSH_POP_Q_SIZE,  PUSH_POP_Q_NAME);  // Init the test Q.
  // Test queue_empty().
  tempResult = queue_empty(&testQ);
  if (!tempResult) {
    printf("* Error: queue_empty(%s) should return true but returned false.\n\r", queue_name(&testQ));
  }
  testResult = tempResult ? testResult : false;  // Logical AND of testResult and tempResult.
  // Run the loop below until you have used up all of the values in the nonCircularQ.
  // Each run of the loop will cause some number of pushes and pops to occur.
  // The loop runs until all values of the nonCircularQ have been pushed, and
  // all values in the push-pop Q are pop'd.
  do {
    // Make sure not to push too much into testQ, or to go beyond the bounds of the nonCircularQ.
    uint16_t spaceInTestQ = queue_size(&testQ) - queue_elementCount(&testQ);    // Size left in testQ.
    uint16_t ncqUnusedValues = NON_CIRC_Q_SIZE - 1 - ncqPushIndexPtr;  // Unused values in noncircularQ.
    uint16_t pushCount = rand() % MAX_PUSH_POP_COUNT;        // Compute a base number of pops.
    // Potentially reduce push-count to available space in testQ
    pushCount = pushCount <= spaceInTestQ ? pushCount : spaceInTestQ;
    // Potentially reduce pushCount to remaining values in noncircularQ.
    pushCount = pushCount <= ncqUnusedValues ? pushCount : ncqUnusedValues;
#ifdef QUEUE_PRINT_INFO_MESSAGES
    printf("push-count:%d\n\r", pushCount);
#endif
    for (uint16_t i=0; i<pushCount; i++) {
      queue_push(&testQ, ncq[ncqPushIndexPtr++]);
    }
    // Number of elements in the simulated non-circular queue that
    // are currently stored in the testQ.
    uint16_t simQElementCount = ncqPushIndexPtr - ncqPopIndexPtr;
    if (queue_elementCount(&testQ) != simQElementCount) {
      printf("* Error: queue_elementCount(%s) returned %ld should be %d\n\r.", queue_name(&testQ),
          queue_elementCount(&testQ), simQElementCount);
      tempResult = false;
      break;  // This needs to be fixed before proceeding further.
    }
    // Don't pop more than you have pushed.
    uint16_t popCount = rand() % MAX_PUSH_POP_COUNT;
    // set popCount to be no more that the current simQElementCount (don't overrun the non-circular queue).
    popCount = simQElementCount >= popCount ? popCount : simQElementCount;
#ifdef QUEUE_PRINT_INFO_MESSAGES
    printf("pop-count:%d\n\r", popCount);
#endif
    // Check each pop'd value for correctness.
    double temp;
    for (uint16_t i=0; i<popCount; i++) {  // Iterate over the pop'd values.
      if ((temp=queue_pop(&testQ)) != ncq[ncqPopIndexPtr]) {  // Should match the non-circular queue.
        printf("* Error: queue_pop(%s) returned %lf, should be %lf", queue_name(&testQ), temp, ncq[ncqPopIndexPtr]);
        tempResult = false;
      }
      ncqPopIndexPtr++;
    }
    // Keep going until all values contained in the non-circular queue are exhausted.
  } while((ncqPushIndexPtr != ncqPopIndexPtr) || (ncqPushIndexPtr != NON_CIRC_Q_SIZE-1));
  testResult = tempResult ? testResult : false;
  return testResult;
}

// Checks to see that underflow and overflow work, and that error messages are printed.
#define ERROR_CONDITION_Q_SIZE 10
#define ERROR_CONDITION_Q_NAME "errorQ"
bool queue_testErrorConditions() {
  bool tempResult = true;  // Local test results.
  bool testResult = true;  // Overall test results.
  // A queue for testing.
  queue_t testQ;
  queue_init(&testQ, ERROR_CONDITION_Q_SIZE, ERROR_CONDITION_Q_NAME);
  // See that the empty function works correctly.
  tempResult = queue_empty(&testQ);
  if (!tempResult) {
    printf("* Error: queue_empty(%s) returned false, should be true.\n\r", queue_name(&testQ));
  }
  testResult = tempResult ? testResult : false;
  // pop an element from the empty queue and check for underflow.
  printf("=== + User code should print a queue empty error message-> ");
  // Check for underflow by popping an empty queue.
  queue_pop(&testQ);
  tempResult = queue_underflow(&testQ);
  if (!tempResult) {
    printf("* Error: queue_underflow(%s) returned false, should be true.\n\r", queue_name(&testQ));
  }
  testResult = tempResult ? testResult : false;
  // Fill up the queue with one too many elements.
  printf("=== + User code should print a queue full error message-> ");
  for (uint16_t i=0; i<ERROR_CONDITION_Q_SIZE+1; i++) {
    queue_push(&testQ, 0.0);
  }
  // Check for overflow should be true.
  tempResult = queue_overflow(&testQ);
  if (!tempResult) {
    printf("* Error: queue_overflow(%s) returned false, should be true.\n\r", queue_name(&testQ));
  }
  testResult = tempResult ? testResult : false;
  // underflow flag should have been cleared with the first push, should return false.
  tempResult = queue_underflow(&testQ);
  if (tempResult) {
    printf("* Error: queue_underflow(%s) returned true, should be false.\n\r", queue_name(&testQ));
  }
  testResult = !tempResult ? testResult : false;
  // Check to see that the queue is full.
  tempResult = queue_full(&testQ);
  if (!tempResult) {
    printf("* Error: queue_full(%s) returned false, should be true.\n\r", queue_name(&testQ));
  }
  testResult = tempResult ? testResult : false;
  // Calling queue_pop() should clear the overflow flag.
  queue_pop(&testQ);
  tempResult = queue_overflow(&testQ);
  if (tempResult) {
    printf("** Error: queue_overflow(%s) returned true, should be false.\n\r", queue_name(&testQ));
  }
  testResult = !tempResult ? testResult : false;
  // Check to see that the queue is no longer full after one pop.
  tempResult = queue_full(&testQ);
  if (tempResult) {
    printf("* Error: queue_full(%s) returned true, should be false.\n\r", queue_name(&testQ));
  }
  testResult = !tempResult ? testResult : false;
  // underflow flag should also be false at this point.
  tempResult = queue_underflow(&testQ);
  if (tempResult) {
    printf("* Error: queue_underflow(%s) returned true, should be false.\n\r", queue_name(&testQ));
  }
  testResult = !tempResult ? testResult : false;
  queue_garbageCollect(&testQ);
  return testResult;
}

// Checks to see that queue_overwritePush() works correctly.
// Simple test: just overwritePushes one set of values, and then another.
// Checks to see that contents are correct afterwards.
#define OVERWRITE_PUSH_TEST_QUEUE_SIZE 100  // tested queue will be this big.
#define OVERWRITE_PUSH_TEST_QUEUE_NAME "overwriteQ"  // tested queue will be this big.
bool queue_overwritePushTest() {
  bool testResult = true;  // Keep track of overall test results.
  // Build a queue for testing.
  queue_t testQ;
  queue_init(&testQ, OVERWRITE_PUSH_TEST_QUEUE_SIZE, OVERWRITE_PUSH_TEST_QUEUE_NAME);
  // Allocate two arrays of test data.
  double* dataArray1 = (double *) malloc((OVERWRITE_PUSH_TEST_QUEUE_SIZE) * sizeof(double));
  for (uint16_t i=0; i<OVERWRITE_PUSH_TEST_QUEUE_SIZE; i++)
    dataArray1[i] = (double) rand();
  double* dataArray2 = (double *) malloc((OVERWRITE_PUSH_TEST_QUEUE_SIZE) * sizeof(double));
  for (uint16_t i=0; i<OVERWRITE_PUSH_TEST_QUEUE_SIZE; i++)
    dataArray2[i] = (double) rand();
  // Fill the queue with all data values.
  for (uint16_t i=0; i<OVERWRITE_PUSH_TEST_QUEUE_SIZE; i++) {
    queue_overwritePush(&testQ, dataArray1[i]);
  }
  for (uint16_t i=0; i<OVERWRITE_PUSH_TEST_QUEUE_SIZE; i++) {
    queue_overwritePush(&testQ, dataArray2[i]);
  }
  // All that should remain are values from dataArray2.
  for (uint16_t i=0; i<OVERWRITE_PUSH_TEST_QUEUE_SIZE; i++) {
    if (queue_readElementAt(&testQ, i) != dataArray2[i]) {  // Are the correct values returned from the queue?
      printf("* Error: the values read from the queue: %s are incorrect after queue_overwritePush().\n\r", queue_name(&testQ));
      testResult = false;
      break;
    }
  }
  // Garbage collect all of the allocated memory.
  queue_garbageCollect(&testQ);
  free(dataArray1);
  free(dataArray2);
  return testResult;
}

// Returns true if test passed, false otherwise.
// This test will build a queue of random size between 10,000 and 20,000 elements, and:
// 1. Create a same-sized array to contain random values to store in the queue.
// 2. Fill the queue with the random values and from the array and then check for full.
// 3. Test to see that queue_readElementAt() works correctly.
// 3. Pop each of the values (checking to see that the correct values are pop'd and then check for empty.
// 4. Test the queue by interspersing pushes and pops in the same queue.
// 5. Refill the array with the previous random values.
// 6. Use queue_overwritePush() to write over all of the elements of the array, checking the contents.
#define QUEUE_TEST_MAX_QUEUE_SIZE 100  // Used for the fill/empty tests.
#define QUEUE_TEST_MAX_LOOP_COUNT 10   // All tests will be invoked this many times.
#define QUEUE_TEST_QUEUE_NAME "test_queue"
bool queue_runTest() {
  bool testResult = true;  // Be optimistic.
  // Overall test will be executed QUEUE_TEST_MAX_LOOP_COUNT times.
  for (uint32_t loopCount = 0; loopCount<QUEUE_TEST_MAX_LOOP_COUNT; loopCount++) {
    printf("=== Queue Test Iteration %ld ===\n\r", loopCount);
    // Compute the size of the data set randomly within given bounds.
    uint32_t arraySize = (rand() % (QUEUE_TEST_MAX_QUEUE_SIZE/2)) + (QUEUE_TEST_MAX_QUEUE_SIZE/2);
    printf("=== Commencing basic fill test (calling queue_push() until full) of queue of size: %ld. === \n\r", arraySize);
    // Allocate the array.
    double* dataArray = (queue_data_t *) malloc(sizeof(queue_data_t) * arraySize);
    for (uint32_t i=0; i<arraySize; i++) {
      dataArray[i] = (double) rand();
    }
    queue_t testQ;  // queue instance used for testing.
    queue_init(&testQ, arraySize, QUEUE_TEST_QUEUE_NAME);  // Init the queue.
    testResult = queue_fillTest(&testQ, dataArray, arraySize) ? testResult : false;
    if (testResult) {
      printf("=== Queue: %s passed a basic fill test.\n\r", queue_name(&testQ));
    } else {
      printf("=== Queue: %s failed a basic fill test.\n\r", queue_name(&testQ));
    }
    if (queue_elementCount(&testQ) != arraySize) {
      printf("* Error: queue_elementCount(%s) is %ld, should be %ld\n\r", queue_name(&testQ), queue_elementCount(&testQ), arraySize);
      printf("* Error: queue_elementCount() likely has a bug.\n\r");
      testResult = false;
    }
    // Run the queue-empty test.
    printf("=== Commencing basic empty test (calling queue_pop() until empty) === \n\r");
    bool tempResult = queue_emptyTest(&testQ, dataArray, arraySize);
    if (tempResult) {
      printf("=== Queue: %s passed a basic empty test.\n\r", queue_name(&testQ));
    } else {
      printf("=== Queue: %s failed a basic empty test.\n\r", queue_name(&testQ));
    }
    testResult = tempResult ? testResult : false;  // Logical AND of testResult and tempResult.
    tempResult = true;
    if (queue_elementCount(&testQ) != 0) {
      printf("* Error: queue_elementCount(%s) is %ld, should be %d\n\r", queue_name(&testQ), queue_elementCount(&testQ), 0);
      printf("* Error: queue_elementCount() likely has a bug.\n\r");
      tempResult = false;
    }
    // Run the push/pop test.
    printf("=== Commencing push/pop test.) === \n\r");
    tempResult = queue_pushPopTest();
    if (tempResult) {
      printf("=== Queue: %s passed a push/pop test.\n\r", queue_name(&testQ));
    } else {
      printf("=== Queue: %s failed a push/pop test.\n\r", queue_name(&testQ));
    }
    testResult = tempResult ? testResult : false;  // Logical AND of testResult and tempResult.
    printf("=== Commencing error-condition test (calling queue_pop() until empty) === \n\r");
    tempResult = queue_testErrorConditions();
    if (tempResult) {
      printf("=== Queue: %s passed error-condition test.\n\r", queue_name(&testQ));
    } else {
      printf("=== Queue: %s failed error-condition test.\n\r", queue_name(&testQ));
    }
    testResult = tempResult ? testResult : false;  // Logical AND of testResult and tempResult.
    printf("=== Commencing overwritePush test (calling queue_pop() until empty) === \n\r");
    tempResult = queue_overwritePushTest();
    if (tempResult) {
      printf("=== Queue: %s passed overwritePush test.\n\r", queue_name(&testQ));
    } else {
      printf("=== Queue: %s failed overwritePush test.\n\r", queue_name(&testQ));
    }
    testResult = tempResult ? testResult : false;  // Logical AND of testResult and tempResult.
    if (testResult) {
      printf("=== All queue tests passed. ===\n\r\n\r");
    } else {
      printf("=== Some queue tests failed. Look at informational messages.\n\r\n\r");
    }
    // All done. Free up all allocated memory.
    queue_garbageCollect(&testQ);
    free(dataArray);
  }
  return testResult;
}

</file>

----
ECEN 390 - Laser Tag Project

User Tools

Site Tools

Page Tools
