ECEN 390 - Laser Tag Project

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Milestone 6: Creative Project ======

Now that you have completely implemented the 2-player game, do something fun and interesting with you system. Here is how it works.
  - Creative projects are done as a group.
  - You email me a short proposal (2-3 sentences is plenty). I'll review the proposal to make sure it is not too difficult or too easy. Once I OK your proposal, I'll list it along with your group on the class web-site. Use this subject line for your email so I don't miss it: **ECEn 390: Milestone 6 Proposal**. Make sure to email your proposal to [[hutch@ee.byu.edu]]. Don't email these via learning suite, I may miss them there.
  - The report for your creative project is a short (2-3 minute) youTube video. Submit a final report via learning suite. The report should contain the approved proposal (the 2-3 sentence emailed proposal) and the link to your youTube video.

**NOTE: Your group is on the hook to achieve what you proposed, so start early! I can't help you with bugs/problems if you leave this until the end of the semester. If you can't get your project to work at all, it will be very difficult to offer much in the way of partial credit.**
===== Youtube Video Grading =====
In most cases, a well-edited video of no more than 2-3 minutes should be adequate.

Here is the grading rubric that I will use when viewing your youtube videos:
  - Overall quality of the video. Please edit your video and make it a quality presentation: 25%.
  - Demonstration of proposed features, i.e., do you demonstrate the functionality of everything that your proposed to do?: 50%.
  - Creativity and novelty of your youtube presentation, i.e., is your youtube video interesting and engaging?: 15%.
  - Entertainment value, i.e., is your youtube video fun to watch?: 10%.

----

===== Appendix =====

----

In this appendix you can find additional information that can be used for creative projects.

==== Bluetooth Modem ====

The bluetooth modem is connected to the ZYNQ FPGA via a fixed-rate 9600 BAUD modem. Communication with the modem is simple enough: characters pushed out the Bluetooth UART are transmitted via the Bluetooth modem and vice versa for receive. I have included documentation for the UART below. There is a bluetooth directory in the lasertag directory that contains source code that shows how to communicate with the bluetooth modem. The provided source code is simple. It receives characters from the bluetooth modem, converts them to upper case and then echos the converted characters to the phone. You use the provided Adafruit Bluefruit Connect App, which is available for both IOS and Android. I have provided links to the documentation below. There is additional information in the README.txt file contained in the bluetooth subdirectory contained in the lasertag directory. You can build and test the provided code by uncommenting one line in the lasertag CMakeLists.txt file.
  * [[https://www.adafruit.com/products/2479|Adafruit Bluetooth Modem Info]]
  * {{::pg142-axi-uartlite.pdf|Xilinx UART Lite Documentation}}
  * [[https://github.com/adafruit/Bluefruit_LE_Connect_Android_v2| Android Bluefruit Connect App on GitHub]]
  * [[https://github.com/adafruit/Bluefruit_LE_Connect_v2 | IOS Bluefruit Connect App on GitHub]]
==== Accessing Additional Pins ====

Not all of the pins on the ZYBO board are in use. Several digital pins are available for your use in your creative projects. See the pictures below for their location. To use these pins, you will need to use the same mio package that you used to drive the LED in the gun, for example. In any case, read the mio.h file for information.

{{annotated330board.jpg?500}}

{{jfpins.jpg?200}}
ECEN 390 - Laser Tag Project

User Tools

Site Tools

Page Tools
