ECEN 390 - Laser Tag Project

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

===== Milestone 3 =====

In this milestone you will implement most of the 'C' code that implements the laser-tag system.

==== Goal ====

Demonstrate the system working with a feedback connection (built into the ECEn Development Board) connecting the output of the transmitter to the input of the ADC. You will demonstrate the ability of your system to:
  * detect hits on each of the 10 frequencies,
  * no false detects,
  * no bouncing of the trigger switch, i.e., register one hit for each push/release of the trigger,
  * display the computed power of each of the channels on the TFT with the provided histogram package.



==== Organization ====

This milestone will be divided into three tasks that will be due and passed off as recorded in Learning Suite.
  - [[Milestone 3 Task 1 | Task 1]]. Implementation and verification of the FIR and IIR filters (filter.c). Demonstrate all sets of of IIR coefficients.
  - [[Milestone 3 Task 2 | Task 2]]. Implementation of the transmitter state-machine (transmitter.c), the trigger state-machine (trigger.c), the hitLedTimer state-machine (hitLedTimer.c), the lockoutTimer state-machine (lockoutTimer.c), and the code to compute the power in the output from each IIR band-pass filter.
  - [[Milestone 3 Task 3 | Task 3]]. Implementation of the detector (detector.c) and integration with all other parts of the project in order to perform the final pass-off for the overall milestone using the feedback provided by the development board.

==== Software Coding Standard ====

All of the tasks comprising Milestone 3 are software tasks and must adhere to the [[http://ecen330wiki.groups.et.byu.net/wiki/doku.php?id=coding_standards|coding standard]].

See learning suite for a breakdown of the credit that you receive for pass-off and source-code submission.

ECEN 390 - Laser Tag Project

User Tools

Site Tools

Page Tools