ECEN 390 - Laser Tag Project

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Linux Options ======

In order of preference:

  - Use the Linux workstations set up in EB 423 (Digital Lab) //**during open times**//.
  - Use the Linux workstations set up in EB 408 (Control Systems Lab).
  - Use a Linux VM image on a flash drive (specs: 128 GB, USB 3, 100 MB/second access speed). You can then plug the flash drive into a Windows-based workstation in EB 424/425 (Analog Lab) that has VMware installed.
  - Use your own personal computer to run a Linux VM if you have at least 60 GB of drive space for VMware and the Linux image. If you don't have 60 GB of space, you can use a flash drive for the VM image as described in the previous option.
  - Run Linux native on your personal computer (spec: Ubuntu 18.04). You are mostly on your own if you choose this option.

For those options involving a Linux VM, a Zipped image is available [[https://byu.box.com/s/q5gis2iz8hwmaw39yhraeqwllwb8jy09|here]]. Do not use the VM image from the 330 website, although the [[https://byu-cpe.github.io/ecen330/setup/vm/| VM setup instructions]] may be helpful to you.

In all cases, you will need access to a ZYBO board. The Digital Lab and the Control Systems Lab have ZYBO boards near each workstation. However, the Analog Lab only has a few laser tag backpacks (with ZYBO boards) in the back of the room that can be shared. When needed, plug these into the host computer with a USB cable. **Do not move bare ZYBO boards between the labs.**

**When connecting a ZYBO board to a host computer, please make sure not to disconnect the USB cable from the board micro connector (the small connector). Please connect/disconnect the big end of the USB cable. The micro-USB connector on the ZYBO board is very fragile and is nearly impossible to repair.**

**Finally, it is the student's responsibility to backup their files. If you lose files and are unable to restore from a backup of those files, there is nothing that I can do.**  For those using the VM, the easiest thing to do is to take regular snapshots of the VM and to store those snapshots in a secure location. VMs do get corrupted from time to time and it is usually an easy matter to restore your VM (and the filesystem) from a previously-saved snapshot.
ECEN 390 - Laser Tag Project

User Tools

Site Tools

Page Tools
