Differences

This shows you the differences between two versions of the page.

--- start [2023/01/02 18:16]
scott [Class Overview]
+++ start [2023/01/10 01:39] (current)
scott [Project Setup]
@@ Line 42: / Line 42: @@
 ===== Project Setup =====
-Download this archive file and extract it into a working directory for your project called ecen390. The command to extract the archive is:
+Download this archive file ({{:ecen390.tgz|ecen390.tgz}}) and extract it into your home directory (or another project directory if you prefer). After extracting it, you will have a new directory called ecen390. The command to extract the archive is:
 <code>
@@ Line 48: / Line 48: @@
 </code>
-The project directory contains everything necessary to work on the lasertag system. <del>After extracting the project directory, make sure you run "make setup" from within the top-level directory. This will install the necessary programming tools for the ZYBO board.</del>
+The ecen390 project directory contains everything necessary to work on the lasertag system. To setup the CMake build system, type the following commands:
+<code>
+cd ecen390/build
+cmake ..
+</code>
+To build your project, type ''make'' from the ecen390/build directory:
+<code>
+make
+</code>
+To download and run your project on the ZYBO board, type the following from the ecen390/build directory:
+<code>
+make run
+</code>
 ----

ECEN 390 - Laser Tag Project